Ruffian x Anvil
1967-1968 Mustang FIA Hood Scoop
1967-1968 Mustang FIA Hood Scoop
Couldn't load pickup availability
Designed for Ruffian’s FIA Fastback Mustang, this paintable, prepreg carbon fiber hood scoop is inspired by Shelby’s FIA Cobra. It's finished in high gloss and comes preinstalled with 3M super strength molding tape. 3M adhesion promoter and an alcohol wipe is included, but aluminum rivets are recommended for high speed applications.
| Material | Carbon Fiber |
| Finish | Gloss |
| L x W x H (Inches) | 28-3/4" x 15-5/8" x 2-3/8" |
| Weight | 2lb (+/- 0.5lb) |
| Vehicle Fitment | 1967-68 Ford Mustang |
| Installation Difficulty | Easy to Moderate |
Click the button below to download the installation instructions in PDF format. We strongly recommend reading over these instructions prior to placing your order so you understand what work is required to install your product.
Billing Information
Billing Information
Payment: Payment method must have a valid billing address that matches the card being used/what the financial institution has on file. Orders using payment methods without a matching billing address are unable to be processed and will be cancelled.
We do not accept gift cards at this time.
Shipping Notes
Shipping Notes
Shipping limited to continental US. If outside the lower 48, please place your order directly through Anvil Auto.
Split Shipments: If your order contains multiple Anvil Auto products or an Anvil Auto product and a physical Ruffian Cars product, you will be invoiced for multiple shipments. Your order will not ship until this invoice has been paid.
-
-
We're excited to debut our new automotive product line, built in collaboration with Anvil Auto.
ANVIL AUTO
FREQUENTLY ASKED QUESTIONS
How well is the fit of your parts with original steel parts?
All of our parts can be used with steel parts (for instance, our vent delete cowl panel with a steel hood).
Are the parts straight and will they stay straight in the sun?
With the exception of an occasional bad part, our parts are very straight and do not warp in the sun unless undue stress is applied to them (ie, too strong hinge springs). If you get a part that does not line up correctly and is not due to tweaked body work on your car, please refer to our return policy to start a return.
How do the Carbon Fiber Hoods compare with a Fiberglass Hood in terms of weight and fit/finish?
Our Carbon Fiber Hoods are typically lighter in weight and more stable than Fiberglass Hoods on the market. The fit and finish are second to none.
Can your parts be painted body color?
Our products can be painted. Initially you would scuff sand the surface, primer and paint and then clear coat it. The process is much like that of painting over cured automotive paint.
Does the front spoiler come predrilled for mounting or is there some fabrication to be done?
Please review the installation instructions for a detailed description of the complexity and steps required, as it varies from piece to piece.
The Front Spoiler does not come predrilled because it allows people to mount them in different ways. They can be mounted like the original but the holes need to be drilled. You would basically place them and mark where the holes would go. Using a regular, sharp drill will work. Make sure the part is set on a block of wood when drilling and don't go too fast. Sometimes it is a good idea to drill smaller holes than is needed and file out as necessary.
If I want to leave the hood plain carbon fiber, is there any coating I need to put on it or is the UV coating on it good enough?
All of our parts have a UV clear coat on them, but if you paint off parts, you will need to scuff sand the surface first, therefore you would need to reclear coat with a UV clear.
Warnings and Disclaimers
Anvil Auto Warranty/Liability disclaimer
Definition of Terms Used in Warranty Policy
- Composite Parts: Composite parts refer to but not limited to forged carbon fiber, carbon fiber, carbon fiber/fiberglass hybrids, and fiberglass.
- Clear Coat: The transparent, protective layer applied to the surface of composite parts to enhance their durability and appearance. The clear coat provides resistance against environmental elements such as UV radiation and abrasion.
This is a conditional warranty. Anvil Auto Inc. warrants all our products to be free of defects in material and workmanship for a period of one year from the date of shipment. Not covered under this warranty is improper assembly, installation, maintenance, use, modifications, or storage. Any product deemed to be defective by Anvil Auto Inc. and returned to Anvil Auto Inc. within one year of the date of shipment will be repaired or replaced at the sole discretion of Anvil Auto Inc. Anvil Auto Inc. does not assume any financial responsibility for the actual costs incurred for the removal and replacement labor, freight/shipping costs, if any, nor for any incidental expenses or consequential damages that may be incurred. The expressed limit of Anvil Auto Inc.'s liability for warranty claims is limited by the original sales price of the product, as evident by the original purchase order and invoice from Anvil Auto Inc., and is not transferable when the product is sold by the original buyer.
All products sold by Anvil Auto Inc. are aftermarket products and are intended for off-road or show use only. Anvil is not liable for any damages or injury as a result of these products. Due to strict regulations by the Department of Transportation, some of these products are not approved for street/highway use. Removal of reinforcements, bumpers, turn signals, and other safety equipment on the vehicle is the responsibility of the buyer. We will not be responsible for your own actions.
Because of the hand made nature of Anvil Auto Inc. parts, there may be very slight surface imperfections, including tiny pin holes that are deemed acceptable. Every part is inspected before it leaves our warehouse and we do not ship parts that do not meet our stringent quality standards unless otherwise disclosed.
In rare instances where remnants of rubbing compound from production appear, simply remove by rubbing with a soft dry cloth. If areas become dull, restore shine by polishing with a clean dry soft cloth and rubbing compound.
Anvil Auto Inc. requires the use of hood pins on all composite part hoods. Anvil Auto Inc. shall not be held liable for any damages to the product and/or vehicle caused by not properly using hood pins. Please note that Anvil Auto Inc. does not recommend re-installing gas/spring hood shocks, dampers, and/or struts. Damages to the hood that result from the use of gas/spring struts will not be covered under warranty.
Anvil Auto Inc. Fitment Guarantee
Please note that due to the handmade nature of our composite parts, minor alterations may be necessary for an ideal fit. All composite parts are therefore unique and any alterations needed, if any, shall be performed by the buyer to their satisfaction before installation.
All products require professional installation. Buyer understands that some products may require modifications for correct fitment. Minor adjustments may be necessary as part of the normal installation process.
Anvil Auto Inc. has made an effort to produce all its aftermarket products to fit as closely as possible to OEM parts. However, some occasional prepping may be necessary for an ideal fit. The buyer needs to perform these steps to their satisfaction before installation. If the buyer wishes to paint the products, they must pre-fit the parts to the vehicle before painting to ensure proper fit. There are absolutely no returns on painted products. It is also important for the buyer to note that any modifications or adjustments made to the products during installation are done at the buyer's own risk. Anvil Auto Inc. shall not be held liable for any damage, injury, and/or labor cost resulting from such modifications or adjustments.
Anvil Auto Inc. does not guarantee part fitment on vehicles that have been involved in accidents, have had or currently have body damage, have been previously modified, and/or using other aftermarket products not sold by Anvil Auto Inc.
Anvil Auto Inc.1-year Clear Coat Guarantee
All of Anvil Auto Inc. composite parts are coated with a UV protective clear coat. Our warranty policy covers the clear coat on all composite parts for one year from the date of shipment. Please note that due to the handmade nature of our composite parts, minor imperfections may occur and shall not be covered under our one year warranty. Not covered under Anvil Auto Inc. 1-year clear coat guarantee is improper maintenance, storage, modifications such as painting, or normal wear and tear.
Proposition 65 Warning
WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov